Hallo
How do you jump the safety circuit on a Nachi AR controller
Thanks...
Hallo
How do you jump the safety circuit on a Nachi AR controller
Thanks...
Hallo leute
welche taste wuss ich drücken ween ich will der robot teachen in kartesiche koordinaten bevengen....?
danke
Hi,
I have just bought a UP50, anno 2003. But there is coming a lot of thin oil out from the hole there the cables come out,
with my finger i can feel that this chamber is wery filled up with oil? is this normal?
Shouldn't there be only thick white grease in all the joints?
it is the last robot in this video:
danke...
Hallo
es ist einer VRS1-B,
Ich probiere noch mals...
Kennt jemand was die WAITRELAYS ist?
ich habe ersetz alle die grösse relays an der motherboard, kriege noch diese fehler.
Hallo leute
Ich habe eine XRC year 2003 und muss einer bevegüng stoppen mit einer input.
ist die kommando "move until" nur im NX100?
danke...
Hello
yes, my next step is to try and "cold boot" from the menu (and also replace accu´s just to be sure..)
I forgot to tell that the first time all these errors came, was while the robot was running in auto (it was running i auto in about one hour at that time)
it just stopped in the middle of a movement between two points.
Simon
thanks for the quick reply
the two cables seems to be in very fine condition, i have even checked inside the harting housings
(unfortunally i dont have other krc2 robots)
When I turn the power off, the screen turns black immediately (no shutting down process)
is this normal...? (once I had a KR3 and i can remember that it made a shutting down process with a beep sound..)
Hello Robotfellas
I keep getting these errors:
DRIVES ERROR A1-A6 No trip
and then:
encoder cable failure A1-A6
and then:
Perform mastering A1-A6
i can move/master the robot for some seconds and then suddenly I get all these errors...
I have just bought the robot (Kr30 year 2005) and it worked fine for 2 days (I had it even running in 100% auto)
can all these error be caused by broken accu´s?
thanks.......
ok I have just testet how to turn off the interbus carte error
press: (but you need the keydisk)
F2
F3
F2 (system I/O)
f4 (interbus output) change the line to "off"
esc
f5 (interbus input) change the line to "off"
it worked for me...now you can use auto...
Hallo,
wenn meiner VK120 hat einer stunde gelaufen, bekommt der 4 achse sehr heiss. ist dass normal. soll mann oil einfüllen oder...?
Danke....
Hallo RobotFellas
Bitte.....kann jemand mich hilfen.
I kriege einige male diese error message an meiner VK120N VRS-1B:
waitrelais fehlt K6/K7...........was ist dass? ich habe die K6 und die K7 relais mít reiniger gemacht.
Grüsse auf Dänemark.......
Hallo RobotFellas
I kriege einige male diese error message an meiner VK120N:
waitrelais fehlt K6/K7...........was ist dass? ich habe die K6 und die K7 relais mít reiniger gemacht.
danke...
ok I have just testet how to turn off the interbus carte error
press:
F2
F3
F2 (system I/O)
f4 (interbus output) change the line to "off"
esc
f5 (interbus input) change the line to "off"
it worked for me...now you can use auto...
hallo berni
The "interbus spannung" error is caused by the settings in robot, it is pretty easy to get rid of, but you need the "shclüssel diskette" to make the change.
later on to day i can check where in the settings it is....
Danke Titan
P-dos?
dd-disketten?
kann etwas mehr sagen...was bedeuted dass?
viele dank...
Hallo
kann jemann sagen wie mann kopiert eine schlüssel diskette?
win XP, win98 oder DOS kann es nicht lesen...(die VRS shrank kann es lesen)
welche computer/programm braucht mann für das?
Vielen dank
Es war genau diese kombination ich süche...danke..es funktioniert
Hallo leute
problem: wenn ich habe programmiert einer folge in Hand und geht zu semiauto oder automatik mode, ist der aktuelle folge nummer jemals 2. ??? wie kann ich dass ändern...?
Viele dank für alle antworten....
grüsse auf Danemark
Ok
ich habe auch diese fehler gefunden, die robi spinnt vie einer mietse kazte.
(eine einstellung mann mit die schlusseldisk kann andern)